Calibration request while profiling bug

[Steve Winter]

Hi,
thanks for your report.

During calibration process (iteration 4) dispcal asked me to

re-calibrate instrument.

Hmm. There are a couple of bugs here. One is that (currentl) Argyll

shouldn't

ask for instrument calibration during display calibration or

profiling.Can confirm the bug in dispread. I've tried to read the
display of the Android device by 1.6.3 dispread in web server mode.
Instrument EyeOne Pro. Dispread executable was loaded from site. I've
tried my own MinGW compilled 1.6.2 dispread - the same result - it asks
a calibration in the middle of display reading process.The other (as you
note) is that it doesn't give you a chance to position

the instrument back on the display afterwards.Confirming too for

dispread. While display instrument calibraton was asked and the
calibration performed the patches continued the changing before I press
any key or moved the instrument onto the display.Dispread 1.6.2 by MinGW
the same behaviour.> Is this behavior is normal, or may be better to
pause dispcal until correct re-positioning

of the instrument on the screen?

This will be fixed in the next release. Let me know if you need a fix

sooner than

that.
Graeme Gill.
Николай Похильченко

Hi Graham,
I'm experiencing the same problem (as above) on 1.6.3 for Windows using
an i1Pro Rev D and Dispcalgui 2.5. I'm asked to calibrate during
iteration 3 when profiling - I saw that someone had worked around this
by setting the profile quality to medium, but that doesn't work for me.
Any suggestions? And thanks for your amazing work in making this
software available to us.
Cheers
Steve Winter

[Kamil Tresnak]

Hi all,

imho medium quality workaround is possible thanks to the lower measurement
number (total), but this is not enough in the case you are using the "I"
option, which introduces additional measuring ... but maybe i am completely
wrong :)

Regards,

Kamil Tresnak

Post by Steve Winter

Hi,
thanks for your report.

During calibration process (iteration 4) dispcal asked me to

re-calibrate instrument.

Hmm. There are a couple of bugs here. One is that (currentl) Argyll

shouldn't

ask for instrument calibration during display calibration or

profiling.Can confirm the bug in dispread. I've tried to read the display
of the Android device by 1.6.3 dispread in web server mode. Instrument
EyeOne Pro. Dispread executable was loaded from site. I've tried my own
MinGW compilled 1.6.2 dispread - the same result - it asks a calibration in
the middle of display reading process.The other (as you note) is that it
doesn't give you a chance to position

the instrument back on the display afterwards.Confirming too for

dispread. While display instrument calibraton was asked and the calibration
performed the patches continued the changing before I press any key or
moved the instrument onto the display.Dispread 1.6.2 by MinGW the same
behaviour.> Is this behavior is normal, or may be better to pause dispcal
until correct re-positioning

of the instrument on the screen?

This will be fixed in the next release. Let me know if you need a fix

sooner than

that.
Graeme Gill.
НОкПлай ППхОльчеМкП

Hi Graham,
I'm experiencing the same problem (as above) on 1.6.3 for Windows using an
i1Pro Rev D and Dispcalgui 2.5. I'm asked to calibrate during iteration 3
when profiling - I saw that someone had worked around this by setting the
profile quality to medium, but that doesn't work for me. Any suggestions?
And thanks for your amazing work in making this software available to us.
Cheers
Steve Winter

[robert-btwG8kScYbJWk0Htik3J/]

I was having an issue of argyll asking for calibration at the end of profiling that wouldn't continue after calibration of my color munki photo. Argyll also would ask for calibration regardless of the "ignore calibration" setting in the menu. Digging out and compiling version 1.7 beta solved both my issues, where version 1.6.3 had these issues.

Post by Kamil Tresnak
Hi all,
imho medium quality workaround is possible thanks to the lower
measurement
number (total), but this is not enough in the case you are using the "I"
option, which introduces additional measuring ... but maybe i am completely
wrong :)
Regards,
Kamil Tresnak

Post by Steve Winter

Hi,
thanks for your report.

During calibration process (iteration 4) dispcal asked me to

re-calibrate instrument.

Hmm. There are a couple of bugs here. One is that (currentl) Argyll

shouldn't

ask for instrument calibration during display calibration or

profiling.Can confirm the bug in dispread. I've tried to read the

display

Post by Steve Winter
of the Android device by 1.6.3 dispread in web server mode.

Instrument

Post by Steve Winter
EyeOne Pro. Dispread executable was loaded from site. I've tried my

own

Post by Steve Winter
MinGW compilled 1.6.2 dispread - the same result - it asks a

calibration in

Post by Steve Winter
the middle of display reading process.The other (as you note) is that

it

Post by Steve Winter
doesn't give you a chance to position

the instrument back on the display afterwards.Confirming too for

dispread. While display instrument calibraton was asked and the

calibration

Post by Steve Winter
performed the patches continued the changing before I press any key

or

Post by Steve Winter
moved the instrument onto the display.Dispread 1.6.2 by MinGW the

same

Post by Steve Winter
behaviour.> Is this behavior is normal, or may be better to pause

dispcal

Post by Steve Winter
until correct re-positioning

of the instrument on the screen?

This will be fixed in the next release. Let me know if you need a

fix

Post by Steve Winter
sooner than

that.
Graeme Gill.
НОкПлай ППхОльчеМкП

Hi Graham,
I'm experiencing the same problem (as above) on 1.6.3 for Windows

using an

Post by Steve Winter
i1Pro Rev D and Dispcalgui 2.5. I'm asked to calibrate during

iteration 3

Post by Steve Winter
when profiling - I saw that someone had worked around this by setting

the

Post by Steve Winter
profile quality to medium, but that doesn't work for me. Any

suggestions?

Post by Steve Winter
And thanks for your amazing work in making this software available to

us.

Post by Steve Winter
Cheers
Steve Winter

[Graeme Gill]

I'm experiencing the same problem (as above) on 1.6.3 for Windows using an i1Pro Rev D and
Dispcalgui 2.5. I'm asked to calibrate during iteration 3 when profiling - I saw that
someone had worked around this by setting the profile quality to medium, but that doesn't
work for me.

Hi,
You can try the V1.7 Beta tools here:

<http://www.argyllcms.com/beta1.7_win32_exe.zip>
<http://www.argyllcms.com/beta1.7_win64_exe.zip>

Graeme Gill.