Spectrolino ürpblem on Ubuntu 12.04 LTS

[Vladimir Gajic]

Hello list,

recently I moved from Mac/PC on Ubuntu. Currently trying to calibrate my
display using Argyll 1.6.3 and dispcalGUI (latest version available). Since
a Spectrolino should be used, traying to connect via a Keyspan USA-28Xb
PDA. The device is recognized automatically by the system. DispcalGUI
detects a device at dev/ttyUSB0.

After triggering my measurement I get the following message:


Setting up the instrument
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'


Here is also the complete command line:


Command line:
dispcal
-v2
-d1
-c1
-yc
"-P0.5,0.5,1.49868073879"
-qm
-t5000
-b130.0
-gl
-f1.0
-k1.0
"SyncMaster 2014-02-16 130cdm² D5000 neutral L M-S LabLUT"

Setting up the instrument
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'


Any hints?


Thanks' in advance

Vladimir

[Udo Lembke]

Hi Vladimir,
perhaps an permission problem?

Can you mail the output of following commands please:

ls -lsa `dispcal -h 2>&1 | grep " 1 = " | tail -1 | awk -F\' '{print
$2 }'`

groups


Regards

Udo

Post by Vladimir Gajic
Hello list,
recently I moved from Mac/PC on Ubuntu. Currently trying to calibrate
my display using Argyll 1.6.3 and dispcalGUI (latest version
available). Since a Spectrolino should be used, traying to connect via
a Keyspan USA-28Xb PDA. The device is recognized automatically by the
system. DispcalGUI detects a device at dev/ttyUSB0.
Setting up the instrument
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'
dispcal
-v2
-d1
-c1
-yc
"-P0.5,0.5,1.49868073879"
-qm
-t5000
-b130.0
-gl
-f1.0
-k1.0
"SyncMaster 2014-02-16 130cdm² D5000 neutral L M-S LabLUT"
Setting up the instrument
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'
Any hints?
Thanks' in advance
Vladimir